Even though the technological advancements have simplified the data storage and filing system by a great deal, the truth is that most programs and files we have on the computer tend to accumulate and occupy a rather large amount of the drive space. Since the programs tend to get more complex every day, consequently they take additional space on the computer. In order to ensure that you will have enough space for your documents and software without diminishing the capabilities of your computer, then one method you can employ is to choose one of the best Vantec hard drive enclosures, the Nextstart3 model.
Wrapped in a resilient aluminum casing, the Nextstar3 hard drive enclosure works on an incredibly fast SATA technology that enables data transfers of 3GB per second. This enclosure model can be connected to the hard drive by either using a 1.1 or 2.0 USB or an eSATA connector. Considering the speed of the data transfer, normally you would expect this device to heat up when it is used at its full capacity. However, you can rest assured that you will not encounter this issue with the Nextstar3 or other Vantec hard drive enclosures for that matter, as almost all models include a special aluminum casing, which is the best material to prevent overheating of the device.
The Vantec Nextstar3 is equipped with only one connector that is used for both power and a connection to the circuit board. The other connector you will notice on the surface of the Nextstar3 is a three-pin access indicator that extends about an inch above the chassis. Therefore, you should expect the installation process of this model to be quite easy and intuitive. On the other hand, it is recommended to take a look at the installation steps indicated by Vantec in the user manual, just to be on the safe side.
The reason why the Nextstar3 is has been rated as one of the best Vantec hard drive enclosures is the fact that it comes with all the necessary features. More exactly, you should expect to see an USB cable, the screws you need to fasten the device during installation, AC power, stand and a SATA to eSATA PCI bracket. What makes the Nextstar3 stand out from other enclosures is the fact that it includes the eSATA port, which provides a better and faster data transfer speed compared to the traditional USB port. Nonetheless, the enclosure contains an USB port as well, making it a rather versatile device. The only critic held against this enclosure is the fact that it does not support IDE drives.
The price range of the product is not yet available as you can only purchase it from online stores with a pre-order for now. Taking into account that Vantec has been a leading brand in producing computer equipment in the past ten years, it should not come as a surprise that the Nextstar3 delivers everything it is supposed to and more. The tests conducted on the baseline performance of this hard drive enclosure have shown that the Nextstar3 potential is practically the same with the one claimed by Vantec.
For years, the WD hard drives have been among the favorite choices of storage devices for both tech savvies and the average customer. However, it is worth noting that Western Digital produces a much wider array of electronics, from home theater systems to network related devices and anything in between. The WD hard drives that have recently captured the hearts of thousands of customers are the external My Book series. Let us analyze its features in order to help you decide whether you should purchase one of the many models of My Book WD hard drives.
For instance, the My Book Premium version of this hard drive line has a storage space of 500 gigabytes, but the compact design and sleek exterior by no means show its extensive size. The name of this hard drive series is derived directly from its shape, as these WD hard drives actually resemble books from all angles. It is worth noting that the data storage space of the My Book series varies from 160 to 500 gigabytes, but all models have 7200 RPM. Consequentially, the Premium version is the high-end product of the series.
The interface of My Book hard drives contains a high speed USB drive and Firewire. On a side note, while the USB 2.0 is operational by default, you will need to install the Firewire. The data reading speed for both of them is extremely fast and this is actually one of the criteria that recommend these external hard drive series as high-end products. However, the same cannot be said about the data writing capabilities, as it behaves quite sluggish. In addition, it is important to note that although the My Book Premium drive comes formatted with a FAT32 system, users who have formatted it using NTFS have witnessed a significant improvement in terms of performance.
An extra highly appreciated feature is the sleek data-backup button which integrates in the overall aspect perfectly. Consequentially, you will be able to ensure the safety of your data with a single press of the button without negatively impacting the book-looks of the drive. In addition, the led next to the button will display information regarding the amount of files currently stored, so you can always act once the drive has accumulated a lot of significant data. Moreover, My Book will turn off by itself once you are not using it for an extended period of time, so it is able to conserve power quite well.
My Book WD hard drives can be acquired for a price around three hundred dollars and you should expect an one-year warranty for them, with full technical support whenever you are experiencing difficulties. Moreover, the hard drive comes with its own system recovery and backup software, in order to ensure the security of your data even more. In conclusion, the My Book Premium hard drive is a lightweight device with an extraordinarily fast data reading time, high storage capacity, convenient design features but with the downside of handling data writing at sub-optimal levels.
The data storage technology nowadays seems to evolve at a very fast pace. If you were to analyze the increase in storage capacity and data transfer rate over the last few years, you would notice that it has actually quadrupled. On the other hand, prices have remained in the same basic range. Therefore, upgrading your internal hard drives has never been easier or cheaper. Moreover, by employing the use of a suitable enclosure, you can transform your internal hard disk into an external one, without having to pay extra. Hard drive enclosures are rather cheap and provide a great deal of benefits, as they enable you to add as several disks, provide protection from physical benefits and simplify the data transfer process overall.
When you are shopping for new internal hard drives, there are three elements to keep in mind, in order to make the best decision. First of all, check whether your motherboard is IDE or SATA, as the drive you purchase needs to have the appropriate connection system in order to be compatible. Next, check the storage space of the hard drive. While the price of the HDD will increase proportionally to the data storage space, pick the drive with the highest available space that fits within your designated budget limit. Lastly, check the data transfer speed, as it will have a pretty big impact on the speed at which your computer can access it and hence, the overall performance of your system.
Internal hard drives can be acquired from either an online store or a local brick and mortar one. Purchasing an internal drive from an online store offers the benefit of comparing several offers and reading customer reviews regarding the product without leaving your home. On the other hand, in a traditional store you can employ the expertise of the sales representative in order to make the best choice for your system. Therefore, while both choices come with their own advantages, this is a matter of personal preference.
Once you are in the possession of the internal drive, you will need to install it on your computer. If you are replacing the old hard drive, you will need to unscrew it from its position and detach the data and power cables from it. Do not forget to turn off the system and remove the power cables, in order to avoid getting electrocuted or short-circuiting the computer. After you removed the old drive, simply slide in the new one in its socket and attach the data and power cables to it. Alternatively, if you are installing an additional hard drive using an enclosure system, all you need to do is insert the drive in the enclosure, close the lid and plug it into the USB port.
While this is only the physical part of the hard drive installation, you will need to ensure your operating system recognizes the new device properly. Therefore, you will need to format and partition your new drive accordingly. Reboot the computer and follow the installation procedure recommended in your motherboard manual. In case the installation does not start, it may be due to an older operating system with a limited driver package. However, the manufacturers always provide a driver disk.